ORBIT-USER: Compare measurement with same packet

[Zhibin Wu]

<1850.76.17.106.242.1164073941.squirrel at webmail.cc.gatech.edu>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
References:
<1850.76.17.106.242.1164073941.squirrel at webmail.cc.gatech.edu>
Sender: owner-orbit-user at liman.rutgers.edu
Precedence: bulk
Reply-To: orbit-user at winlab.rutgers.edu

please check:
http://orbit-lab.org/wiki/Documentation/OML/FAQ
read "How do I configure OML measurement collection via nodehandler?"

On 11/20/06, semhatre at cc.gatech.edu <semhatre at cc.gatech.edu> wrote:
> Hi,
>
> I just saw a reply to a mail regarding doubts in measurement which 
> refers to 'pkt_sqno' column on sender side and receiver side tables 
> being different.
>
> It says the following-
>
> The measurements is averaged over all packets sent/received in one 
> second. But the sequence number cannot be averaged. So it only takes 
> the sequence  number of the packet received first during this minute.
> If you want to compare the measurement with the same packet, another 
> filter has to be used instead.
>
> I wanted to know which filter is to be used to measure with the same 
> packet at sender and receiver side and what is the procedure for it.
>
> Regards,
> Swapnil
>


--
Zhibin Wu
Graduate Research Assistant
WINLAB, Rutgers University
Technology Centre of New Jersey
671 Route 1 South
North Brunswick, N.J. 08902-3390
Phone: 732-932-6857 x653
Fax:   732-932-6882